The TS Roto have been specifically designed to terminally sterilize liquids in sealed containers, such as plastic bags, glass bottles, BFS bottles, syringes, vials, etc. In fact, their design allows for automatic...
TS-OW - cGMP Terminal sterilizers
The TS-OW autoclaves have been specifically designed to terminally sterilize liquids in sealed containers, such as plastic bags, glass bottles, BFS bottles, syringes, vials, etc. In fact, their design allows for automatic variable pressure compensation based on the temperature difference (ΔT) of the product probes (RTD) inserted on a “sample” container. This type of check prevents the plastic containers from deforming, becoming damaged and changing colour.
Process Features
These sterilizers are equipped with a high-flow water recirculation system, thanks to the centrifugal pumps and “double-head multitube” heat exchangers which allow a “water” medium (WFI or PW) to be used as a means of transferring heat to warm up, sterilize and cool down the load. The system ensures optimum heat distribution throughout the entire sterilization phase (temperature deviation below ± 1°C). This process method provides for faster cycles but the treated product comes out still damp. Nevertheless, it remains the preferred method in most cases, due to its simplicity, cost-effectiveness and ease of validation.
Additional Information
- Circular sterilization chamber with square or rectangular hatches (doors).
- The TS-OW model is single-walled (no cavity).
- Some reinforcements are welded onto the outside of the chamber and/or cavity to ensure stability during operating conditions..
- The chamber is positioned on a base that has been designed specifically to evenly distribute the weight on the floor.
- The loading trolley-inserting and removing guides are positioned on the bottom of the chamber; they are also height-adjustable.
- The bottom of the chamber converges towards the drain sump in order to make disposing of the condensate easier.
- Two 2” tri-clamp ferrules are welded to the chamber for validation purposes (temperature uniformity mapping and pressure tests).
- All of the chambers internal surfaces are mechanically polished and then subjected to chemical degreasing, pickling and passivation treatments. Surface finish: ≤ 0.35 micron.
- Above-floor or recessed chamber installation possible (depending on the size).
Related Products
The DHS dry heat sterilizers have been designed to class 100 (ISO 5) hot air sterilize and depyrogenate empty glass containers, such as bottles, vials and stainless-steel parts. By retaining the dry heat at a...
The NEBULA autoclaves have been designed to sterilise heat-resistant and moisture-stable materials – such as metal parts, plastic and rubber components, liquids in ventilated or sealed containers, and fabrics etc
The RSA Autoclaves have been designed to sterilise – by means of clean saturated steam – heat-resistant and moisture-stable materials, such as metal parts, plastic or rubber components, liquids in ventilated (open) or...
An Innovative and efficient Batch !Actini has developed and patented a Batch decontamination unit with unique characteristics and incomparable thermal and energy performance. Product Features:Effluent BSL:...
Modular and Evolutive: an equipment that evolves with your production!
Actini has designed a continuous thermal effluent decontamination system that is fully standardized for bio-industries and laboratories that do...
With a treatment capacity of 1000 liters per day, the MicroSteam decontamination system has been designed to secure and facilitate your laboratory operations.
This compact unit meets the most stringent...
With a treatment capacity of 300 liters per day, the Micro (MDS) decontamination system has been designed to secure and facilitate your laboratory operations.
This compact unit meets the most stringent...
Unique solutions for your critical Cleaning Process
Hamo cleaning equipment has been designed for specific applications in the life science industries. These are used for the cleaning of critical components such as...
Unique solutions for your critical Cleaning Process
Hamo cleaning equipment has been designed for specific applications in the life science industries. These are used for the cleaning of critical components such as...
The TS-AS autoclaves have been specifically designed to terminally sterilize liquids in sealed containers, such as plastic bags, glass bottles, BFS bottles, syringes, vials, etc. In fact, their design allows for...
The ETO sterilizers have been designed to sterilize – by means of ethylene oxide – heat-sensitive materials, such as plastic syringes, infusion sets, dialysis filter cartridges, plastic materials and special surgical...