The pretreatment includes all the process steps to prepare the water to feed the final water treatment steps that could be Reverse osmosis, Electrodeionization, Ultrafiltration and if WFI is required distillation.
The...
Multi-effect distillation units
Distillation has long been recognized as the most reliable method to generate sterile pyrogen-free water. This natural liquid-vapor-liquid phase process consistently remove impurities from water without the use of membranes or filters, which have the potential to foul or degrade over time causing contamination breakthrough.
The Elettracqua design employs high temperatures, which guarantees constant pyrogen-free water production and requires lower maintenance since there are no moving parts. Elettracqua units can be used for generation of WFI (Water for injection) and/or Pure Steam.
Specifications
Energy-Saving Design
Multiple Effect Distillation Units type ELETTRA LPps-series provides maximum energy recovery.
The incoming water feeds the final condensing unit and will be heated, a second increasing heat step will occur by DTS Heat Exchanger supplied by Industrial Steam condensate, coming from the first distiller column.
The column of each effect operates in series, only the first one is heated by plant steam. The steam produced from each effect is used to feed the downstream effect in sequence of steps.
The principle of evaporator design is associated with the flash evaporation of feed water and the mechanical separation on bacterial endotoxin with droplets of water using centrifugal force.
Skid construction features
Each ELETTRACQUA system is customized to meet our customers requirements, starting for example from room lay out to have the best installation solution.
- Frame: AISI 304
- Piping and fittings: AISI 316L ASME BPE
- Connections: Tri-clamp
- Valves: AISI 316L
Compliance
- CGMP
- USP PW
- EU Pharmacopoeia
- ISPE Baseline Guide
- GAMP
Cyclon separation system
The steam separation system is the heart of the system being installed inside the evaporation column; directly in contact with the pure steam produced by the separation of the water droplets from the pure steam.
ELETTRACQUA new pure steam generators and distillation units are all equipped of cyclone steam separation systems instead of the demister traditionally used for this purpose.
Two basic principles are involved in the steam separation by Cyclon System:
- High Steam Speed creating centrifugal forces that separate any entrained water particles and throw them to the outer wall of separator to drain.
- Double 180 turns: the pure steam flow direction is forced to double 180° turns inducing gravity separation of larger water droplets.
The pharmaceutical customers pay lots attention to the materials and surface finishing, the cyclone system, that is the heart of the system is the only device designed to meet all the material and finishing requirements, including ferrite tests. The cyclone separation system for its nature is a fully hygienic device.
Related Products
Reverse osmosis (RO) is a technology based on a semi-permeable membrane that is permeable to the water but impermeabile to other substances as salts, endotoxins and bacteria.
Reverse osmosis membrane salt removal is...
Reverse osmosis (RO) is a technology based on a semi-permeable membrane that is permeable to the water but impermeabile to other substances as salts, endotoxins and bacteria.
Reverse osmosis membrane salt removal is...
An Innovative and efficient Batch !Actini has developed and patented a Batch decontamination unit with unique characteristics and incomparable thermal and energy performance. Product Features:Effluent BSL:...
Modular and Evolutive: an equipment that evolves with your production!
Actini has designed a continuous thermal effluent decontamination system that is fully standardized for bio-industries and laboratories that do...
With a treatment capacity of 1000 liters per day, the MicroSteam decontamination system has been designed to secure and facilitate your laboratory operations.
This compact unit meets the most stringent...
With a treatment capacity of 300 liters per day, the Micro (MDS) decontamination system has been designed to secure and facilitate your laboratory operations.
This compact unit meets the most stringent...
Unique solutions for your critical Cleaning Process
Hamo cleaning equipment has been designed for specific applications in the life science industries. These are used for the cleaning of critical components such as...
Unique solutions for your critical Cleaning Process
Hamo cleaning equipment has been designed for specific applications in the life science industries. These are used for the cleaning of critical components such as...
The TS-AS autoclaves have been specifically designed to terminally sterilize liquids in sealed containers, such as plastic bags, glass bottles, BFS bottles, syringes, vials, etc. In fact, their design allows for...
The TS-OW autoclaves have been specifically designed to terminally sterilize liquids in sealed containers, such as plastic bags, glass bottles, BFS bottles, syringes, vials, etc. In fact, their design allows for...
The TS Roto have been specifically designed to terminally sterilize liquids in sealed containers, such as plastic bags, glass bottles, BFS bottles, syringes, vials, etc. In fact, their design allows for automatic...
The ETO sterilizers have been designed to sterilize – by means of ethylene oxide – heat-sensitive materials, such as plastic syringes, infusion sets, dialysis filter cartridges, plastic materials and special surgical...