No cost of maintenance thanks to the automatic compressed air cleaning system of the cartridges
Efficiency filtration up to 99.9% (residual penetration ≤0,1%)
Extremely quiet for its category thanks to the built-in...
Extraction arm 4-PRO – Stainless steel (EPI series)
- All the advantages of the top of the range and stainless steel AISI 316 combined in one extraction arm
- Very easy to handle thanks to the patented structure with 4 pantographs and the insertion of balancing springs also to the arm section on the hood side
- Perfect for applications requiring the exclusive use of stainless steel machinery and systems
- Possibility of accessories and special hoods made of stainless steel AISI 316
- Available in 3 different variants to meet every need
- No component immersed in the suction flow and therefore minimum pressure drops
- Available in both the hanging and standing version
- Available in the INDUSTRY and LABORATORY model
Description
The uniqueness of 4-Pro with stainless steel warranty
Each AIRBRAVOTM extraction arm has been designed to meet specific needs and complex problems in the frame of the industrial and laboratory extraction. The stainless steel 4-PRO arm embodies all the experience and technology of the 4 Pro extraction arm adding all the advantages of stainless steel AISI 316, characterized by a remarkable resistance to corrosion and extremely robust and durable.
The INDUSTRY model is available in 125 – 160 – 200 – 250 mm diameters and with a length of 2, 3 and 4 meters; the LABORATORY model extraction arms are available in diameters of 100 and 125 mm and lengths of 1 and 2 meters.
Applications
Particularly suitable for applications where it is necessary to maintain a high level of hygiene also thanks to the use of stainless steel AISI 316, this extraction arm is mainly used within the food and agri-food industry as well as in the chemical industry in the presence of specific aggressive pollutants under certain conditions of temperature and concentration.
Rotation and handling
The AirbravoTM 4-PRO extraction arm thanks to its structure manages to reach any working position. In fact there are three arm joints as well as three rotation axes (one on the base and two on the hood). The quad pantograph structure, moreover, makes it very easy to handle for the operator who is able to direct the extraction in a precise manner towards the source of pollutants.
It can be supplied with or without exhaust fan.
| Lenght mm |
Pipe Diameter mm |
Base dia. mm |
Code Hanging v. |
Code Standing v. |
|---|---|---|---|---|
| LAB MODEL | ||||
| 1000 | 100 | 125 | EPI1110 | EPI6110 |
| 1000 | 125 | 125 | EPI1112 | EPI6112 |
| 2000 | 100 | 125 | EPI1210 | EPI6210 |
| 2000 | 125 | 125 | EPI1212 | EPI6112 |
| INDUSTRIAL MODEL | ||||
| 2000 | 125 | 200 | EPI1213 | EPI6213 |
| 2000 | 160 | 200 | EPI1216 | EPI6216 |
| 2000 | 200 | 200 | EPI1220 | EPI6220 |
| 2000 | 250 | 200 | EPI1225 | EPI6225 |
| 2000 | 250 | 250 | EPI1226 | EPI6226 |
| 3000 | 125 | 200 | EPI1312 | EPI6312 |
| 3000 | 160 | 200 | EPI1316 | EPI6313 |
| 3000 | 200 | 200 | EPI1320 | EPI6320 |
| 3000 | 250 | 200 | EPI1325 | EPI6325 |
| 3000 | 250 | 250 | EPI1326 | EPI6326 |
| 4000 | 125 | 200 | EPI1412 | EPI6412 |
| 4000 | 160 | 200 | EPI1416 | EPI6416 |
| 4000 | 200 | 200 | EPI1420 | EPI6420 |
| 4000 | 250 | 200 | EPI1425 | EPI6425 |
| 4000 | 250 | 250 | EPI1416 | EP6426 |
Technical data may be subject to change without notice.
Additional Information
Variants
- Extraction arm with just hood and pipes made of stainless steel (code: EP…/I)
- Extraction arm with all and only the parts in contact with the extracted fluid made of stainless steel (code: EP…/I2)
- Atex Extraction arm entirely made of stainless steel AISI 316 (code: EPX…/II) or with only pipes and hood made of stainless steel AISI 316 (code: EPX … / I) or with only parts in contact with the fluid made of stainless steel (code: EPX…/I2)
Specifications
Extraction arm
Entirely made in stainless steel Aisi 316: Rigid piping, self-supporting structure provided with four pantographs, springs and screws. Multiple frictions adjustable on the joints. Joints with flexible non-toxic Polyurethane piping, reinforced with harmonic coppered steel wire helix, with operating temperatures between -20 ° C and 80 ° C (FDA approved). No component is immersed in the suction flow.
Hood
Standard “hot fumes” hood in the shape of a truncated cone with large elliptical collection area, made of stainless steel Aisi 316 and provided with a handle. With 3 rotation axes to allow optimal movement of the arm in any position.
Basement
Basement on a 360° revolving base plate with a 200 or 250 mm diameter for the INDUSTRY model (125mm for the LABORATORY model), with seals made of special self-lubricating plastic material.
Wall Bracket
As for the INDUSTRY model, the wall bracket is made of stainless steel Aisi 316 tubular and provided with a fitting and counter-flange; as regards the LABORATORY model the wall bracket is made of stainless steel aisi 316 sheet metal and provided with a coupling. The coupling and counter-flange are not included in the version equipped with an exhaust fan.
Exhaust fan (if required)
Centrifugal, forward curved blades impeller, made of stainless steel AISI 316, motor 220/400V, 3Ph, 50Hz. IP55. IE3 for power outputs over 0,55kW.
Fields of Applications
Food Industry and Agribusiness
Chemical Industry
Cosmetic and Pharmaceutical Industry
Metallurgical and Mechanical Industry
Laboratories
Related Products
For the purification of the fumes and vapours released during the various processes in chemical and pharmaceutical laboratories.
They are equipped with a multi-level filtering system (overlapping modules).
Filtration...
Designed specifically for the extraction of pollutants in the pharmaceutical industry since it avoids the risks of cross-contamination
Support structure, external to the suction flow, entirely made of stainless steel...